Smart Home Automation System
Design and build a complete smart home system that controls lights, fans, appliances, and security using IoT.
Electrical EngineeringSolar Power Generation System
Design a complete off-grid solar power system with MPPT charge controller, battery bank, and monitoring.
Electrical EngineeringAutomatic Street Light Controller
Build an intelligent street light system that automatically turns on at dusk and off at dawn, with IoT monitoring.
Electrical EngineeringDigital Energy Meter with IoT
Design a smart energy meter that measures voltage, current, power, and energy with real-time cloud dashboard.
Electrical EngineeringPower Factor Correction System
Design an automatic power factor correction system using a switched capacitor bank and microcontroller.
Electrical EngineeringElectric Vehicle Charging Station
Build a Level 2 AC EV charging station with SAE J1772 pilot signal, RFID auth, and cloud management.
Electrical EngineeringAutomatic Transfer Switch (ATS)
Build an automatic transfer switch that switches between mains and generator power within seconds during outages.
Electrical EngineeringOnline UPS System Design
Design a 1kVA online double-conversion UPS with SPWM inverter, battery charger, and bypass relay.
Electrical EngineeringSmart Grid Monitoring System
Build a smart grid monitoring system collecting real-time power quality data from multiple nodes using Modbus and cloud analytics.
Electrical EngineeringThree-Phase Motor Controller (VFD)
Design a variable frequency drive (VFD) to control three-phase induction motor speed using SPWM inverter technology.
Electrical EngineeringBattery Management System (BMS)
Design a complete BMS for a 16S LiFePO4 battery pack with cell balancing, SOC estimation, and protection.
Electrical EngineeringMotor Speed Control using PWM
Control DC motor speed and direction using PWM signals with L298N H-bridge and closed-loop PID controller.
Electrical EngineeringAutomatic Irrigation Controller
Build a smart irrigation system using soil moisture sensors, RTC scheduling, and IoT monitoring to optimize water usage.
Electrical EngineeringLED Driver Circuit Design
Design a constant-current LED driver circuit for high-power LEDs with thermal management and PWM dimming.
Electrical EngineeringDC to AC Inverter (12V → 220V)
Build a 500W pure sine wave inverter converting 12V DC battery to 220V AC with SPWM control.
Electrical EngineeringVoltage Stabilizer Design
Design a 2kVA automatic voltage stabilizer using tap-changing autotransformer and microcontroller relay switching.
Electrical EngineeringWind Energy Monitoring System
Build a comprehensive wind turbine monitoring system measuring wind speed, power output, and performance metrics.
Electrical EngineeringSmart Meter with IoT Integration
Build an AMI-compatible smart electricity meter with remote reading, prepaid top-up, and tamper detection.
Electrical EngineeringSubstation Protection Relay System
Build a digital protection relay implementing overcurrent, earth fault, and differential protection for a distribution substation.
Electrical EngineeringElectrical Panel Design
Design and build a complete domestic/commercial electrical distribution panel with proper protection coordination.
Electrical EngineeringSCADA System for Power Plants
Design and implement a SCADA system for a small power plant with real-time monitoring, historian, and alarm management.
Electrical EngineeringDemand Side Management System
Build an intelligent demand-side management system that automatically schedules and controls loads to minimize peak demand.
Electrical EngineeringTransformer Design and Testing
Design, build, and test a single-phase distribution transformer from core selection through no-load and load testing.
Electrical EngineeringElectrical Safety and Earthing System
Design and implement a comprehensive electrical earthing system with soil resistivity measurement and earth resistance testing.
Electrical EngineeringPower Line Communication System
Implement a narrow-band power line communication system for smart meter AMI using the existing power network.
Electrical EngineeringElectric Load Management System
Design an intelligent load management system that monitors, analyzes, and controls industrial electrical loads to optimize consumption.
Electrical EngineeringHigh Voltage DC Transmission Model
Build a scaled laboratory model of an HVDC transmission system demonstrating rectification, DC transmission, and inversion.
Electrical EngineeringElectric Arc Furnace Controller
Design an electrode regulation system for an electric arc furnace model with current control and power factor optimization.